Dozers

D6N Track-Type Tractor

image desc
Additional Views:
Quick Quote

Specification Summary

Engine Model
Cat® C7.1 ACERT™
Flywheel Power
166 HP
Operating Weight
36943 lb
Bore
4.1 in
Print this page Email to a Friend

Engine

Engine Model
Cat® C7.1 ACERT™
Flywheel Power
166 HP
Bore
4.1 in
Stroke
5.3 in
Displacement
433 in³
Engine Power - Maximum - At 2,200 rpm - SAE J1995
182 HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396
178 HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)
180 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349
166 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
168 HP
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Transmission

1.0 Forward
2.1 mile/h
1.5 Forward
2.7 mile/h
2.0 Forward
3.6 mile/h
2.5 Forward
4.7 mile/h
3.0 Forward
6.1 mile/h
0.5 Forward (EU)
1.5 mile/h
0.7 Forward (EU)
1.6 mile/h
0.5 Forward
1.6 mile/h
0.5 Reverse
1.9 mile/h
0.7 Forward
1.7 mile/h
1.0 Forward (EU)
1.9 mile/h
1.7 Forward
3 mile/h
2.7 Forward
5.2 mile/h
1.0 Reverse
2.5 mile/h
1.5 Reverse
3.4 mile/h
2.0 Reverse
4.4 mile/h
2.5 Reverse
5.9 mile/h
3.0 Reverse
7.6 mile/h
Maximum Drawbar Pull - 1.0 Forward
71939 lbf
Maximum Drawbar Pull - 2.0 Forward
44512 lbf
Maximum Drawbar Pull - 3.0 Forward
25403 lbf
0.7 Reverse
2.1 mile/h
1.7 Reverse
3.7 mile/h
2.7 Reverse
6.5 mile/h
0.5 Reverse (EU)
1.8 mile/h
0.7 Reverse (EU)
1.9 mile/h
1.0 Reverse (EU)
2.2 mile/h

Service Refill Capacities

Fuel Tank
73.2 gal (US)
Cooling System
10.6 gal (US)
Final Drive - Each
1.8 gal (US)
Hydraulic Tank
7.8 gal (US)
Engine Crankcase
4.5 gal (US)
Power Train
42.3 gal (US)
DEF Tank
5 gal (US)
Roller Frames XL/LGP - Each
20/17.5 L (4.3/4.6 gal)

Weights

Operating Weight
36943 lb
LGP VPAT - Blade
2720 lb
LGP VPAT - Foldable
3287 lb
LGP VPAT - Landfill
3166 lb
Multi-Shank Ripper - With 3 Shanks
2959 lb
XL SU - Blade
5732 lb
XL VPAT Blade
2341 lb
XL VPAT Foldable
2762 lb
XL VPAT Landfill
2912 lb
Shipping Weight - XL
36153 lb
Operating Weight - LGP
40446 lb
Operating Weight - XL
36943 lb
Shipping Weight - LGP
39339 lb
Operating Weight - XL Waste Handler
40818 lb
Operating Weight - LGP Waste Handler
44749 lb
Shipping Weight - XL Waste Handler
40029 lb
Shipping Weight - LGP Waste Handler
43642 lb
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Operating Weight - XL Fine Grading
38162 lb
Shipping Weight - XL Fine Grading
37373 lb

Undercarriage

Shoes/Side - XL
40
Shoes/Side - LGP
46
Track on Ground - XL
102.6 in
Track on Ground - LGP
122.4 in
Ground Contact Area* - XL
5518 in²
Ground Contact Area* - LGP
8928 in²
Track Rollers/Side - XL
7
Track Rollers/Side - LGP
8
Ground Pressure - XL*
6.7 psi
Ground Pressure - LGP*
4.5 psi
Note (1)
*ISO 16754
Grouser Height - XL
2.6 in
Shoe Width - LGP
33.1 in
Grouser Height - LGP
2.2 in
Shoe Width - XL
24 in
Track Gauge - LGP
85 in
Track Gauge - XL
74.4 in
Shoe Width - XL - Fine Grading
24 in
Shoes/Side - XL - Fine Grading
46
Grouser Height - XL - Fine Grading
2.6 in
Track Gauge - XL - Fine Grading
74.4 in
Track on Ground - XL - Fine Grading
122.4 in
Ground Contact Area* - XL - Fine Grading
6479 in²
Ground Pressure* - XL - Fine Grading
5.8 psi
Track Rollers/Side - XL - Fine Grading
8
Note (2)
All dimensions with SystemOne undercarriage.

Blades

Capacity - LGP VPAT
5.1 yd³
Width - LGP VPAT - Foldable
13.42 ft
Capacity - XL SU
5.6 yd³
Width - XL SU
10.33 ft
Capacity - XL VPAT
4.3 yd³
Width - XL VPAT
10.75 ft
Capacity - LGP VPAT - Foldable
5.1 yd³
Width - LGP VPAT
13.42 ft

Ripper

Pocket Spacing
3.3 ft
Shank Gauge
6.6 ft
Shank Section
73 mm × 176 mm (2.9 in × 6.9 in)
Weight - With Three Shanks
3444 lb
Each Additional Shank
172 lb
Maximum Clearance Raised - Shank Tip
24.5 in
Maximum Penetration Force - LGP
9667 lbf
Maximum Penetration Force - XL
11600 lbf
Maximum Pry-out Force - LGP
38217 lbf
Maximum Pry-out Force - XL
47480 lbf
Maximum Penetration - XL
20.2 in
Maximum Penetration - LGP
15.6 in
Type
Fixed Parallelogram
Number of Pockets
3
Overall Beam Width
86.7 in
Beam Cross Section
216 mm × 254 mm (8.5 in × 10.0 in)

Winch

Cable Ferrule Size - O.D. × Length
54 mm × 67 mm (2.13 in × 2.63 in)
Control
Electric
Maximum Bare Drum - Line Speed
141 ft/min
Maximum Full Drum - Line Speed
217 ft/min
Overall Width
38.4 in
Rope Diameter - Recommended
0.875 in
Winch Case - Width
38.4 in
Winch Drive
Mechanical
Maximum Bare Drum - Line Pull*
69200 lb
Maximum Full Drum - Line Pull*
44410 lb
Winch Model
PA55
Drum Capacity - 22 mm (0.88 in)
288.75 ft
Oil Capacity
19.55 gal (US)
Winch and Bracket Length
45.1 in
Drum Diameter
10 in
Drum Width
12.4 in
Flange Diameter
19.8 in
Note (2)
Slow and standard speed winches are available.
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Weight*
2814 lb

Standards

FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes
Brakes meet the standard ISO 10265:2008.

Sustainability - Sound and Vibration Levels

Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006
85.5 dB(A)
Sound Levels - Maximum Sound Power Level - 2000/14/EC
110 dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008
76 dB(A)
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001
2.5 m/s2 (8.2 ft/s2)
Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006
0.5 m/s2 (1.6 ft/s2)
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6
Less Than 0.7

Sound and Vibration - Cab

Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when t
Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance o
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different e
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (2)
If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power le

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Hydraulic Controls - Pump

Angle Cylinder Flow - VPAT
33.5 gal/min
Lift Cylinder Flow
33.5 gal/min
Pump Output - Implement
33.5 gal/min
Pump Output - Steering
36.2 gal/min
Ripper Cylinder Flow
33.5 gal/min
Tilt Cylinder Flow
23.8 gal/min

Hydraulic Controls - Pressures

Maximum Implement Operating Pressure
3640 psi
Maximum Steering Operating Pressure
6556 psi
Engine Model
Cat® C7.1 ACERT™
Flywheel Power
166 HP
Bore
4.1 in
Stroke
5.3 in
Displacement
433 in³
Engine Power - Maximum - At 2,200 rpm - SAE J1995
182 HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396
178 HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)
180 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349
166 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
168 HP
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
1.0 Forward
2.1 mile/h
1.5 Forward
2.7 mile/h
2.0 Forward
3.6 mile/h
2.5 Forward
4.7 mile/h
3.0 Forward
6.1 mile/h
0.5 Forward (EU)
1.5 mile/h
0.7 Forward (EU)
1.6 mile/h
0.5 Forward
1.6 mile/h
0.5 Reverse
1.9 mile/h
0.7 Forward
1.7 mile/h
1.0 Forward (EU)
1.9 mile/h
1.7 Forward
3 mile/h
2.7 Forward
5.2 mile/h
Fuel Tank
73.2 gal (US)
Cooling System
10.6 gal (US)
Final Drive - Each
1.8 gal (US)
Hydraulic Tank
7.8 gal (US)
Operating Weight
36943 lb
LGP VPAT - Blade
2720 lb
LGP VPAT - Foldable
3287 lb
LGP VPAT - Landfill
3166 lb
Multi-Shank Ripper - With 3 Shanks
2959 lb
XL SU - Blade
5732 lb
XL VPAT Blade
2341 lb
XL VPAT Foldable
2762 lb
XL VPAT Landfill
2912 lb
Shipping Weight - XL
36153 lb
Operating Weight - LGP
40446 lb
Operating Weight - XL
36943 lb
Shipping Weight - LGP
39339 lb
Shoes/Side - XL
40
Shoes/Side - LGP
46
Track on Ground - XL
102.6 in
Track on Ground - LGP
122.4 in
Ground Contact Area* - XL
5518 in²
Ground Contact Area* - LGP
8928 in²
Track Rollers/Side - XL
7
Track Rollers/Side - LGP
8
Ground Pressure - XL*
6.7 psi
Ground Pressure - LGP*
4.5 psi
Note (1)
*ISO 16754
Grouser Height - XL
2.6 in
Shoe Width - LGP
33.1 in
Grouser Height - LGP
2.2 in
Shoe Width - XL
24 in
Track Gauge - LGP
85 in
Track Gauge - XL
74.4 in
Capacity - LGP VPAT
5.1 yd³
Width - LGP VPAT - Foldable
13.42 ft
Capacity - XL SU
5.6 yd³
Width - XL SU
10.33 ft
Capacity - XL VPAT
4.3 yd³
Width - XL VPAT
10.75 ft
Capacity - LGP VPAT - Foldable
5.1 yd³
Width - LGP VPAT
13.42 ft
Pocket Spacing
3.3 ft
Shank Gauge
6.6 ft
Shank Section
73 mm × 176 mm (2.9 in × 6.9 in)
Weight - With Three Shanks
3444 lb
Each Additional Shank
172 lb
Maximum Clearance Raised - Shank Tip
24.5 in
Maximum Penetration Force - LGP
9667 lbf
Maximum Penetration Force - XL
11600 lbf
Maximum Pry-out Force - LGP
38217 lbf
Maximum Pry-out Force - XL
47480 lbf
Maximum Penetration - XL
20.2 in
Maximum Penetration - LGP
15.6 in
Type
Fixed Parallelogram
Number of Pockets
3
Overall Beam Width
86.7 in
Beam Cross Section
216 mm × 254 mm (8.5 in × 10.0 in)
Cable Ferrule Size - O.D. × Length
54 mm × 67 mm (2.13 in × 2.63 in)
Control
Electric
Maximum Bare Drum - Line Speed
141 ft/min
Maximum Full Drum - Line Speed
217 ft/min
Overall Width
38.4 in
Rope Diameter - Recommended
0.875 in
Winch Case - Width
38.4 in
Winch Drive
Mechanical
Maximum Bare Drum - Line Pull*
69200 lb
Maximum Full Drum - Line Pull*
44410 lb
Winch Model
PA55
Drum Capacity - 22 mm (0.88 in)
288.75 ft
Oil Capacity
19.55 gal (US)
Winch and Bracket Length
45.1 in
Drum Diameter
10 in
Drum Width
12.4 in
Flange Diameter
19.8 in
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes
Brakes meet the standard ISO 10265:2008.
Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006
85.5 dB(A)
Sound Levels - Maximum Sound Power Level - 2000/14/EC
110 dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008
76 dB(A)
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001
2.5 m/s2 (8.2 ft/s2)
Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006
0.5 m/s2 (1.6 ft/s2)
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6
Less Than 0.7
1.0 Reverse
2.5 mile/h
1.5 Reverse
3.4 mile/h
2.0 Reverse
4.4 mile/h
2.5 Reverse
5.9 mile/h
3.0 Reverse
7.6 mile/h
Engine Crankcase
4.5 gal (US)
Power Train
42.3 gal (US)
Maximum Drawbar Pull - 1.0 Forward
71939 lbf
Maximum Drawbar Pull - 2.0 Forward
44512 lbf
Maximum Drawbar Pull - 3.0 Forward
25403 lbf
Note (2)
Slow and standard speed winches are available.
Operating Weight - XL Waste Handler
40818 lb
Operating Weight - LGP Waste Handler
44749 lb
Shipping Weight - XL Waste Handler
40029 lb
Shipping Weight - LGP Waste Handler
43642 lb
Shoe Width - XL - Fine Grading
24 in
Shoes/Side - XL - Fine Grading
46
Grouser Height - XL - Fine Grading
2.6 in
Track Gauge - XL - Fine Grading
74.4 in
Track on Ground - XL - Fine Grading
122.4 in
Ground Contact Area* - XL - Fine Grading
6479 in²
Ground Pressure* - XL - Fine Grading
5.8 psi
Track Rollers/Side - XL - Fine Grading
8
Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when t
Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance o
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different e
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (2)
If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power le
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Angle Cylinder Flow - VPAT
33.5 gal/min
Lift Cylinder Flow
33.5 gal/min
Pump Output - Implement
33.5 gal/min
Pump Output - Steering
36.2 gal/min
Ripper Cylinder Flow
33.5 gal/min
Tilt Cylinder Flow
23.8 gal/min
DEF Tank
5 gal (US)
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
0.7 Reverse
2.1 mile/h
1.7 Reverse
3.7 mile/h
2.7 Reverse
6.5 mile/h
Note (2)
All dimensions with SystemOne undercarriage.
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Operating Weight - XL Fine Grading
38162 lb
Shipping Weight - XL Fine Grading
37373 lb
Roller Frames XL/LGP - Each
20/17.5 L (4.3/4.6 gal)
Maximum Implement Operating Pressure
3640 psi
Maximum Steering Operating Pressure
6556 psi
0.5 Reverse (EU)
1.8 mile/h
0.7 Reverse (EU)
1.9 mile/h
1.0 Reverse (EU)
2.2 mile/h
Weight*
2814 lb