Motor Graders

14M3 Motor Grader

image desc
Additional Views:
Quick Quote

Specification Summary

Base Power (1st Gear) - Net
238 HP
Operating Weight - Typically Equipped
57250 lb
Blade Width
14 ft
Engine Model
Cat C13
Print this page Email to a Friend

Engine

Base Power (1st Gear) - Net
238 HP
Engine Model
Cat C13
Bore
5.1 in
Stroke
6.2 in
Speed at Rated Power
1,850 rpm
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
122 °F
Note (2)
Optimized VHP Plus is standard for the 14M3.
Torque Rise
41%
Maximum Altitude - Full Power
13900 ft
Maximum Torque - VHP Plus
1137 lb/ft
Emissions
Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)
14349 ft
Maximum Altitude - Full Power (Tier 2)
12049 ft
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum
550 rpm
Note (4)
Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
Displacement
763 in³
Number of Cylinders
6
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum
1,600 rpm

Frame

Circle - Outer Diameter
71.7 in
Front Axle - Wheel Lean - Left/Right
17.1°
Front Axle - Total Oscillation per Side
32°

Moldboard

Blade Width
14 ft
Arc Radius
16.3 in
Throat Clearance
4.6 in
Blade Width - With End Bits
169 in
Blade Height - With Cutting Edge
24.9 in
Blade Width - Without End Bits
164 in
Blade Height - Without Cutting Edge
23 in

Blade Range

Maximum Depth of Cut
23.3 in
Circle Centershift - Left
25.6 in
Maximum Lift Above Ground
16.5 in
Circle Centershift - Right
20.5 in
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
Moldboard Sideshift - Right
31.1 in
Moldboard Sideshift - Left
29.1 in
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
Blade Tip Range - Forward
40°

Weights

Operating Weight - Typically Equipped
57250 lb
Gross Vehicle Weight - Base* - Total
50980 lb
Gross Vehicle Weight - Base* - Front Axle
13994 lb
Gross Vehicle Weight - Typically Equipped - Total
57250 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Base Power (1st Gear) - Net
238 HP
Engine Model
Cat C13
Bore
5.1 in
Stroke
6.2 in
Speed at Rated Power
1,850 rpm
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
122 °F
Note (2)
Optimized VHP Plus is standard for the 14M3.
Torque Rise
41%
Maximum Altitude - Full Power
13900 ft
Maximum Torque - VHP Plus
1137 lb/ft
Emissions
Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)
14349 ft
Maximum Altitude - Full Power (Tier 2)
12049 ft
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum
550 rpm
Note (4)
Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
Displacement
763 in³
Number of Cylinders
6
Circle - Outer Diameter
71.7 in
Front Axle - Wheel Lean - Left/Right
17.1°
Front Axle - Total Oscillation per Side
32°
Blade Width
14 ft
Arc Radius
16.3 in
Throat Clearance
4.6 in
Blade Width - With End Bits
169 in
Blade Height - With Cutting Edge
24.9 in
Blade Width - Without End Bits
164 in
Blade Height - Without Cutting Edge
23 in
Maximum Depth of Cut
23.3 in
Circle Centershift - Left
25.6 in
Maximum Lift Above Ground
16.5 in
Circle Centershift - Right
20.5 in
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
Moldboard Sideshift - Right
31.1 in
Moldboard Sideshift - Left
29.1 in
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
Blade Tip Range - Forward
40°
Operating Weight - Typically Equipped
57250 lb
Gross Vehicle Weight - Base* - Total
50980 lb
Gross Vehicle Weight - Base* - Front Axle
13994 lb
Gross Vehicle Weight - Typically Equipped - Total
57250 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Standard - Fan Speed - Maximum
1,600 rpm